SNCR脱硝技术在液态排渣煤粉工业锅炉中的应用

为了检验选择性非催化还原（SNCR）脱硝技术在高效低NO_x液态排渣煤粉工业锅炉中的应用效果，本文在一台8.4MW有机热载体锅炉炉膛内开展了SNCR脱硝技术工业化试验研究。选用尿素作为还原剂，搭建了工业化SNCR脱硝试验平台。在10%、15%、20%三种浓度尿素溶液下进行了不同尿素溶液喷射量、不同氧含量、不同锅炉负荷下的SNCR脱硝试验研究。试验结果表明，提出的“低NO_x燃烧+SNCR脱硝”耦合技术方案是可行的，SNCR脱硝效率在80%以上，完全能够达到烟气中NO_x低于50mg/m³的超低排放要求。     

Automated classification of simulated wind field patterns from multiphysics ensemble forecasts

In this study, we have proposed an automated classification approach to identify meaningful patterns in wind field data. Utilizing an extensive simulated wind database, we have demonstrated that the proposed approach can identify low‐level jets, near‐uniform profiles, and other patterns in a reliable manner. We have studied the dependence of these wind profile patterns on locations (eg, offshore vs onshore), seasons, and diurnal cycles. Furthermore, we have found that the probability distributions of some of the patterns depend on the underlying planetary boundary layer schemes in a significant way. The future potential of the proposed approach in wind resource assessment and, more generally, in mesoscale model parameterization improvement is touched upon in this paper.     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

A study on the Fe–Cl thermochemical water splitting cycle for hydrogen production

Thermochemical water splitting cycles are recognized as one of the promising pathways for sustainable hydrogen production. In the present study, Iron-chlorine (Fe–Cl) cycle as one of the chlorine family thermochemical cycles where iron chloride is consumed for hydrogen production from water, is considered for a study. This four-step cycle is modelled by Aspen Plus software package and analyzed for performance investigation of each reaction step and system's components. The parametric studies are also performed to assess the effect of operation conditions such as temperature, pressure and steam to feed ratio on the reaction products and conversion rates. Results indicated that although the effect of pressure is not significant on reaction's production rates, an increase in temperature favors oxygen production in reverse deacon reaction and magnetite production in hydrolysis and lowers hydrogen production in the hydrolysis step. On the other hand, steam to chlorine (Cl₂) ratio is directly correlated with hydrochloric acid (HCl) and oxygen production in reverse deacon reaction and hydrogen production in hydrolysis.     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

Influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings

This paper presents influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings. Eight 1/1.5‐scale steel eave columns were constructed and tested under low cyclic reversed loading, including 4 specimens with bracket set and 4 specimens without bracket set. Based on the analysis of the strain of the specimens, the failure modes of the specimens were obtained. In addition, the hysteresis loops, skeleton curves, degradations of stiffness and strength, ductility, and dissipation capacities of the specimens were analyzed. Bracket set changed the force transfer mechanisms and failure modes of the specimens and had a significant influence on the seismic performance of the specimens. Compared with the specimens without bracket set, the yielded and ultimate bearing capacities of the specimens with bracket set improved by 30.7% and 24.0%, respectively. And also, the stiffness of the specimens with bracket set at the yielded and ultimate points increased by 52.8% and 135.6%. The dissipation capacities of the specimens with bracket set were 2.12 times those of the specimens without bracket set at yielded load. However, the ductility of the specimens with bracket set slightly decreased by 8.5%. It was shown that the seismic performance of the specimens with bracket set was better than that of the specimens without bracket set. The work in this paper provides a basis for further theoretical study on the seismic performance of steel eave columns in Chinese traditional style buildings.     

三塘湖盆地中—下侏罗统煤层甲烷风化带划分

以三塘湖盆地中、低煤阶煤层含气量和主要气体成分为基础,结合盆地构造、沉积及水文地质特征,对汉水泉凹陷和条湖凹陷煤层甲烷风化带进行了划分,并对库木苏凹陷、马朗凹陷、淖毛湖凹陷和苏鲁克凹陷煤层甲烷风化带进行了预测。结果表明,三塘湖盆地甲烷风化带深度为400~1000 m.由于受东北冲断隆起带的影响,三塘湖盆地北部甲烷风化带浅于南部。沉积方面,盆地东部淖毛湖凹陷、马朗凹陷和条湖凹陷深湖—半深湖和辫状河三角洲成煤环境优于盆地西部汉水泉凹陷和库木苏凹陷扇三角洲成煤环境,盆地东部甲烷风化带普遍浅于西部;水文地质方面,条湖凹陷和马朗凹陷中开启性局部滞留水文地质单元形成的甲烷风化带浅于其他凹陷封闭性弱径流水文地质单元的甲烷风化带。初步预测马朗凹陷北部为下一步煤层气勘探开发的优势区块,条湖凹陷北部为下一步煤系气勘探开发的优势区块。     

Simulation Study on Hydrogen-Heating-Power Poly-Generation System based on Solar Driven Supercritical Water Biomass Gasification with Compressed Gas Products as an Energy Storage System

Supercritical water gasification driven by solar energy is a promising way for clean utilization of biomass with high moisture content, but direct discharge of liquid residual causes energy waste and decreases energy efficiency. To reduce energy waste, a poly-generation system for hydrogen-rich gas production coupling heat supply and power generation based on supercritical water gasification of biomass driven by concentrated solar energy was established in this paper, which also provided a novel energy storage method to overcome the shortcomings of solar discontinuity. Thermodynamic model of the system was proposed and life cycle assessment(LCA) of the system was conducted. Influence of different parameters(temperature of 600℃ to 800℃, outlet temperature of heat exchanger of 42℃ to 56℃, biomass slurry concentration of 5% to 6.5%) on the gasification performance, energy and exergy efficiency, energy distribution and global warming potential(GWP) was discussed. The results indicated that hydrogen yield increased as gasification temperature increased since free radical reaction was enhanced which gas production reaction was classified into. Molar fraction of hydrogen increased as gasification temperature increased and reached 65.6% at 750℃. Energy and exergy efficiency of the system reached 74.84% and 34.87% at 700℃ and 600℃ respectively and that of gas production was 18.15% at 650℃, which was the highest. Increasing reaction temperature and decreasing biomass slurry concentration were effective ways to decrease GWP. Optimal operating parameter was reaction temperature of 650℃, outlet temperature of heat exchanger of 50℃ and biomass concentration of 5%.     

低温贮藏对“翠香”猕猴桃冷害和品质的影响

研究以"翠香"猕猴桃为试材,比较两种温度(0±0.5℃和2±0.5℃)下,贮藏果实的冷害发生情况及品质差异,同时关注果实贮藏期间果实苦味的产生,以期找出果实苦味产生的原因。结果表明,0±0.5℃贮藏时,果实硬度保持较好,果实呼吸强度下降,有冷害和褐变发生,并伴有果实发苦现象;而2±0.5℃贮藏的果实未见冷害和褐变发生,色度得以保持,多酚氧化酶(PPO)和过氧化物酶(POD)活性下降,极显著延缓了细胞膜透性的升高,此外,果实可溶性固形物和维生素C的含量也显著提高,果实没有出现苦味。试验中发现"翠香"猕猴桃苦味现象和冷害伴随产生,并随着冷害发展加重,推测"翠香"果实的苦味可能是由冷害造成的。